Solid carbide twist drill with IC d= 12,0/L3= 307 HAK NHC-7000Solid carbide twist drill with IC d= 12,0 L3= 307 HAK NHC 7000

Tungsten carbide burr uncoated WRC/ HP-6 d1=12/ l2=25/ d2=6 / l1=70mm

6100 d2/d3 = 10 - 10 mm L1 = 80 mm front side securing

Carbide Tipped Circular Saw Blade - Rip sawblade - Flat tooth with chip limitor 300x3

Ersatz-Reinigungs-Propeller Typ 260mm

HSSE-PM Machine tap M6x1

SET Countersink HSS-XE BLUE - 100° UNEQUAL PITCH 6

Thread configuration with a special design

drill depth 30mm d=20

SET Countersink T

0 / l2=25 / d2=6 / l1=175mm BESTSELLER

Hard-Line40 d=21mm

Tungsten carbide burr uncoated KEL/ HP-1 d1=6 / l2=18 / d2=6 / l1=50mm