FS Nozzle 3D 1/2"The FS Nozzle 3D with its contoured egg shaped design was created to be a penetrating nozzle. Made from hardened stainless steel with 3D fluid mechanics, four one piece ceramic inserts at 0 15 in front successfully penetrate and open tough blockages. The smooth Egg shape combined with 20 degree rear propulsion jets enables the nozzle to slide easily down the pipe. Additional sizes available upon request.

Type of Camera Rod Size Rod Length Pipe Size Large 1/2 300 12 Mid 1/2 200 10 Mini 3/8 200 6 Other lengths and sizes available upon request

This hose is most commonly used on 4"

The US Jetting Safety Dump Gun has a 30" long single barrel

earthenware pipes

It's ideal for cleaning pipes with diameters ranging from 3/4" to 1 1/2"

the transducer used is the J-022-103-ASSY

drain out as much of the old fluid as possible and add new oil to cover the top bearing and wave spring

If one diaphragm is damaged

This sewer nozzle is available in two configurations - 5-8 GPM and 8-12 GPM

while the remaining sixty percent is directed towards the four rear jets to provide thrust for propulsion

This nozzle requires Warthog Fast Fluid (2J-349-19) every 50 hours of use

The 1/2" x 500' Piranha high pressure jetting hose is available with 4000 PSI and 5000 PSI working pressure