Jeep Wrangler JK JKU 07-11 3.8L Starter Mounting Bolts 10.9Set of (2) 10. 9 Class (metric equivalent to Grade 8) hardened zinc plated hex bolts with washers to mount the starter on 2007 2011 3. 8L Jeep Wrangler JK and Unlimited JKU Replaces Mopar 6102120AA and 6104432AA

Please see the second pic above

Front and Rear Upper frame side flag nuts (4)

9 Class and Grade 8 hardened yellow zinc plated bolts

yellow zinc plated fender washers to go vertically thru the side steps into the tub

CJ7 and Scrambler (w/ T4

These are not the light duty nutserts that are commonly available

They also are all too short to use with aftermarket track bar/sector shaft braces which are a common upgrade on JK's and also often include undersized M14 bolts with the kits

which is most likely the case if your original nutserts are spinning

9 (metric equivalent to Grade 8) Zinc Flake Coated flange bolts for mounting the steering gear box to the frame on all 07-18 Jeep Wrangler JK's and JKU's

These are also used on the HVAC duct on CJ's

These are the special shoulder bolts that pass though the end link bushings

Replaces Mopar J4007446