56033-0152 // Pilot Drill

For the coolant supply through the centre of PSK toolholders

Measuring contact points are designed to allow measurements near to the bottom of blind holes

Horizontal und vertikal aufspannbar

102 x 38 x 15

ADJRGA = Length adjustment range

To determine position of workpiece surfaces or workpiece lengths in Z-direction on lathes or milling machines

prevents over-feeding

For longitudinal and plane turning

d = 40/d = 60: For large diameter face mill cutters with four additional threaded holes according to DIN 2079

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance6

Standard (over 25mm range)

Ersatz-Reinigungs-Propeller Typ 160mm