Flaming seaThis set of knife scales is made from stabilized boxelder burl and alumilite clear slow resin, they were pressure cast at 60psi each half measures roughly 1 2x2x5 3 4 long

Using a lathe speed of 2400-3000 rpm

instructions can be found under the Turning Instructions tab

state and federal regulations

A pencil eraser sized amount is all that is needed from each bottle

Polish the sanded item with mild pressure for 20-60 seconds

blanks measure 7/8”x5-1/4” long

OBATIAN MEDICAL TREATMENT IMMEDIATELY

Warranty: If Craft-Coat is proven defective

If you experience eye watering

MJ is not recommended for use on friction polish finishes or raw unfinished woods

If surfaces already have an existing coating on them make sure that the surface is scuffed and all loose and damaged coating is removed

Start with STEP #1 and work up the numbers