Textiles. Tests for colour fastness - Colour fastness to dry cleaning using perchloroethylene solvent1 Scope This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to drycleaning using perchloroethylene solvent. This method is neither suitable for the evaluation of the durability of textile finishes, nor is it intended for use in evaluating the resistance of colours to spot and stain removal procedures used by the drycleaner. This test covers colour fastness to drycleaning only;

Any UK National Annexes and Published Documents referenced normatively or informatively in the above standards

where such doors are required to be self-closing

This document specifies minimum requirements for the optical effects and the mechanical

matter insoluble in acetic acid

The recommendations and discussions within this document can also be applicable to other types of packaging that cannot be evaluated by other means

such as pitch diameter and internal thread minor diameter

The method is applicable to steel surfaces which have been blast-cleaned by use of either shot abrasives or grit abrasives

This technical report applies to medical electron accelerators when used

see test procedures in IEC 62153-4-7 or IEC 62153-4-12

For items 52 and 53

The performance tests comprise testing carried out under laboratory and field conditions

It is used in such applications as telephone trunk lines