Rennsteig Crimp Tool for Amphenol H4 S&F Contacts - P/N 624 1175 3 1 RT* NOTE: RENNSTEIG TOOLS HAVE A 6 8 WEEK LEAD TIME. PRICES ARE HIGHER AT THE MOMENT DUE TO TARIFFS. * This crimp tool is recommended for the crimping of Amphenol H4 stamped and formed (S&F) contacts. The excellent handling, easy exchange of the crimping insert bits, and the possibility of adding a positioning aid are facts in favor of these crimping pliers. For male and female contacts. KEY FEATURES Multi gauge Crimps 14 AWG, 12 AWG, and 10 AWG with

20 in Width 6

Every MNGP2 is proudly manufactured in the USA

Specification Detail Manufacturer MidNite Solar Model MNSPD-300-AC Type UL1449 4th Edition Type 1 Nominal Voltage 0-250 VAC MCOV 470V VPR Line to Ground 1200V Surge Current Rating 80kA per phase Short Circuit Current Rating 10kA Response Time <1 microsec Energy Absorption 3130 J (Full Device)

Battery Negative Stud: 5/16" diameter stud for battery negative tie point

The New FLEXnet DC System Monitor integrates with your OutBack system and displays critical information on the OutBack Mate display

with a 10-Year Alternative (sold separately)

1V Maximum Power Current (Ipm) 0

68kW hybrid inverter with 14

This extension is perfect either to extend one wire 15 feet to another MC4 connection

000 cycles @ 80% DoD Recommended Charge Current <55A Maximum Charge Current 100A Recommended Charge Voltage 55

Industry standard MODBUS communications protocol

and industrial applications requiring substantial battery capacity