C2218K /C3 -SKF CARB Toroidal Roller Bearing - 90x160x40mmThis C2218K C3 bearing is a Open Type CARB Toroidal Roller Bearing with a 1: 12 tapered bore and a larger than standard radial internal clearance. The bearing's dimensions are 90x160x40. C22 18 K C3 CARB Toroidal Roller Bearings 90mm Bore Size Tapered Bore, Taper 1: 12 Stampted Steel Cage, Roller Centred Radial Internal Clearance Greater Than Normal

The bearing has a width of 30mm and a length of 90mm

1/8inch - Bore Size Eccentric Collar Lock with Flush Inner Ring on One Side

The design of the NJ203ECP SKF bearing ensures even load distribution and carries heavy radial loads while maintaining a low cross-sectional height and low friction

This 7224CTRDULP3 bearing is a Super Precision angular contact bearing with a 15° contact angle and a phenolic cage

61801 2rs1 Bearing Steel Thin Section with A Bore Diameter of 12mm Two Rubber Seals Normal Internal Clearance

This 6308 SKF bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 40x90x23

The dimensions of the SKF NU330ECM/C3 bearing are 150x320x65mm

3mm - Bore Size Model Code

80 BTR 10 S TYN DB L P4A Bore Size - 80mm 40° Contact Angle 10 Series Rings and Rolling Elements - Bearing Steel Ball Guided Polyamide Resin Cage Open Type Duplex Back to Back Light Precision Rating

This 7212CD/P4ADGA bearing is a Super Precision angular contact bearing with a 15° contact angle and a high capacity design

22 11 e k tn9 w64 Wide Bore Size - 55mm Extra Capacity Tapered Bore (1:12 on Diameter) Glass Fibre Reinforced PA66 Cage

The bearing's dimensions are 95x200x77