24B 2-NO107 - RENOLD 1 1/2 Inch Pitch Premier Standard LinkFor use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See Riveting Chain Endless' for full instructions).

32 08 A C3 Maximum Capacity

this bearing also has a standard radial internal clearance The bearing's dimensions are 12x37x17

NU 2 26 E M1 Two Flanges on Outer Ring and No Flanges on Inner Ring Light Series 130mm - Bore Size Increased Capacity Design Solid Brass Cage

6917 c3 Bearing Steel Thin Section with a Bore Diameter of 85mm Open Type Internal Clearance Greater than Normal

This 7000CDGB/P4A bearing is a Super Precision angular contact bearing with a 15° contact angle and a high capacity design

No Flange on Outer Ring Medium 100mm - Bore Size Standard Design Machined Brass Internal Clearance Greater Than Normal

The bearing has a width of 40mm and a length of 110mm

6906 2rs1 Bearing Steel Thin Section with A Bore Diameter of 30mm Two Rubber Seals Normal Internal Clearance

NJ 22 14 E T Metric

NU 22 04 E TVP2 C3 Two Flanges on Outer Ring and No Flanges on Inner Ring Light

NU 10 08 M1 C3 Two Flanges on Outer Ring and No Flanges on Inner Ring Extra Light Series 40mm - Bore Size Solid Brass Cage

72 20 CTR SU L P3 Series - Light Bore Size - 100mm 15 Degree Contact Angle Single Universal Light Preload Precision Rating