Binks Conventional Spray Gun Extension Style "EB"Extended reach, Spray Pattern on 90 degree angle. Needs to be pressure fed from a pressure tank, pump or pressure cup. Uses any of the standard "60" series fluid nozzle and air cap (specify when ordering). Fits through a 3" clearance diameter. Adjustment knob for fan control. The head of the extension is a fixed 90 degree spray, it does not swivel. Needle shuts material off at the tip. Useable length of extension is approximately 1 1 2" shorter that

Change out needles from the front of the gun with just a click

It will not fit the lo-boy or skid units except for the 840 and 1140 units

Inner window

Compressor Pump: Stainless-steel braided discharge hose · Splash lubricated · Large canister intake filter · Oil level sight indicator

Water trap filter

50 CFM regulator capacity

EasyGlide™

Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

B 5000 GM Lo boy 222488 A 5000 GM CONVERT (Bare) 231316   5000 GM Hi boy 231052 A

For Job Pro (CA) Series pressure washer models:

Turn tip 180˚ to easily clear clogs

For use with the following airless sprayers