Tool shanks with 7/24 taper for automatic tool changers - Dimensions and designation of shanks of forms J, JD and JF1 Scope This part of ISO 7388 specifies the dimensions of tool shanks with a 7 24 taper of shank form J (with two possible additions for each) for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

for some applications the recommendations and/or instructions of use of a product may differ and therefore additional test conditions need to be used

indicating thermometer and alarm systems to manufacture efficient closed reach-in types refrigerators and ensure necessary quality standard are achieved

ISO/IEC 27004 includes extensive examples of different types of measures

which may require separate consideration

Construction professional bodies

for use as permanent places of residence

Annex B (informative) Airflow performance test report

Automation engineers

26 - Method for declaring parameters for ultrasonic diagnostic equipment using test objects

Nibblers and shears

BS 2453 on Steel wire for spokes is useful for:

BS 7766:1994