ER-Collet with seal for IC ER32 | 470EH | < 15µm | Ø 6Application: Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped (applicable up to 120 bar). In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

wrench and collets

(applicable up to 21 bar)

00005" / 0

The design allows the caliper to be used in normal workshop conditions and is resistant to coolant

For large diameter face mill cutters with four additional threaded holes according to DIN 2079

Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER-system

For longitudinal and plane turning

- Without wrench

integrated in the adapter

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance6

Spray nozzle can be closed

Hinged mounting device for toolholders