Tungsten carbide burr Blue-Tec coated WRC/ HP-4 d1=10 / l2=20 / d2=6 / l1=170mmTungsten carbide burr Blue Tec coated WRC HP 4 d1=10 l2=20 d2=6 l1=170mm

Tungsten carbide burr Blue-Tec coated WRC / HP-2 d1=6/ l2=12

Rip sawblade - Alternate top bevel tooth 315x3

Tungsten carbide burr uncoated KSJ/ HP-2 d1=6 / l2=6 / d2=6 / l1=50mm

B4 - 25 x 16 x 30

Tungsten carbide burr uncoated KUD/ HP-7 d1=2 / l2=1

With drivers

Tungsten carbide burr Blue-Tec coated ZYB/ HP-6 d1=16 / l2=25 / d2=8 / l1=70mm

Tungsten carbide burr uncoated RBF/ HP-1 d1=6 / l2=12 / d2=3 / l1=44mm

2x32mm without teeth

6x30mm 140TFN PH: 2-9-46

Tungsten carbide burr uncoated Flame/HP-9 d1= 12 / l2= 32 / d2= 6 / l1= 77mm

right angularity: 0