Hi-Tension Ignition Spark Wire with Spark Plug Boot for S7 and S15CPart # 1009265 Description: S7 and S15C Ignition Wire Assembly With MPA ignition Used On Where is it located: S7 Nighthawk S15C Falcon Ignition wire runs from the rear frame of the roaster to the electrode sticking out of the side of the cyclone by the sight glass. Contents: 1 Ignition Wiring Harness Parts Service Factor Life Expectancy: Life expectancy is approximately 5 years. Symptoms indicating replacement needed include difficulty with lighting a

Bearing inserts are located on the front and rear of the roaster in the drum paddle bearing housing

Bearing Assembly for the S15 Falcon and S35 Kestrel

Located under the purge gate cover

Duration and Date: Two-day workshop

Located around the E-Stop switch on the operator's console

cracks or melting of the wiring insulation

Top of Cyclone to Hot Exhaust Stack connection

but it is dependent upon roaster usage

Dungs Pressure Switch

This is used on the S35C roaster with underground thermocouples and is not compatible with the S35A/B underground thermocouples

Bundle and Save

The locking version of the wheel part 1002624 can be found here